Garage Door Noise Problems – How to Solve Them?

0
Garage Door

Noisy garage doors are definitely annoying. They come equipped with automatic systems, which make them very convenient. It is not only irritating but also unsafe when one’s vehicle is parked in the garage at night or when you have unexpected visitors. There are several factors that lead to noisy garage door opening such as excessive wind, malfunctioning garage door openers, and faulty garage door motors.

Some homeowners prefer garage doors because they want to avoid the noise made by the motor and to minimize noise when the door is up and closed. However, they often overlook the other issues that may be causing such undesirable sound. A noisy garage door may be caused by the torsion springs. This is a complex system which uses two springs that are wound tightly around a shaft and are installed to the side of the garage door.

A noisy garage door noise is normally louder when the door is raised. If you find that it is quieter when the door is lowered, then there may be a problem with the torsion spring or the cables. Torsion springs and cables can sometimes snap resulting to a loud noise, which you need to take safety precautions about. If the problem is serious, you should consult a technician from Capital Garage doors Orleans.

Noise from Springs

If the noise is due to the springs, you will need to lubricate the moving parts using a lubricant such as Garage Door Pro Lube Synthetic Garage Door Lubricant. This type of lubricant will not damage the moving parts. However, if you are using this lubricant, you must be careful not to apply too much. The Garage Door Pro Lube Synthetic lubricant has a high water solute concentration, which makes it an excellent lubricant for your garage door.

Before you lubricate the rollers, it would be better if you could see them so that you will be able to identify whether you need to lubricate or not. However, most of the lubricants in the market will usually not affect the rollers at all. You need to take safety precautions when handling lubricants.

Noise from Track

Now, if the noise comes from the track, then you should check the pulley system. It is important that the track is properly aligned with the rollers. However, if the track is already out of place, then you should avoid tightening it. Instead, you should adjust it. Remember, loose garage door springs can lead to injury especially if the people working under it are not wearing the proper safety gears.

Noise from Garage Door Opener

Now, the next step is to move on to the clopay or trained clopay garage door opener. The clopay system is equipped with sensors that will indicate when it has reached the top or bottom of the garage door. You need to lubricate these sensors regularly. In fact, it should be checked regularly. It would be best if you lubricate them right after every use or after every month. A dry lubricant does not contribute to the efficiency of your system and you can avoid grease build up as well.

To fix the problem, you can either remove the garage door opener or tighten the belt drive pulley. The lubricant lubricator should also be used in order to avoid the problem from occurring again. To ensure safety, you need to take safety precautions like installing the safety sensors as well as adjusting the rollers. After doing so, you should always remember to lubricate the clopay to avoid any mishaps.

Noise from Belt Drive

When you have installed a clopay to fix the noise problem, the most common cause of the problem is the belt drive. Belt drive problems are usually caused by rusty or bent pulleys. To fix this problem, you can lubricate the pulleys with mineral spirits or by using WD40. However, you must not adjust, repair, or replace belt drive pulleys as it can be dangerous for you. This is also another reason why you should consult a professional before making any type of changes to your garage door.

Another reason why the clopay Pro Lube synthetic garage door lubricant works best is that you do not need to lubricate the hinges or rollers. With the help of lubrication, the moving parts within the door will be safe and secure and they will not be damaged easily. The lubricant also makes the door come alive when it comes in contact with hot or cold weather. In addition, the lubricant improves the life of the hinges and rollers.

Finally, you can solve the noisy garage door noise problems by following some simple steps or calling a technician from Capital Garage Doors in Orleans, Ontario. If you have installed a modern opener, you must check the motor to make sure it is working properly. If the motor is not working properly, it might be because the chain isn’t properly attached to the roller. In order to fix this problem, you can tighten the belt drive so that both the roller and the chain are properly connected. Similarly, if you have a faulty roll roller and the chain is properly connected, then you can try replacing the same with a new one so that the noise level will be reduced.