Pool Tips To Keep Your Swimming Pool In Great Condition

It’s easier to keep your pool spotless than you may imagine. Each pool has a unique set of maintenance requirements. The secret to excellent pool health is frequent, regular maintenance, which they all have in common. Always read the manufacturer’s instructions before repairing or operating equipment, even if you decide to handle simple issues like murky water or malfunctioning pumps yourself.

Picture by: ecohome.net

Whether you hire a service provider to take care of your pool, you still need to do a few things on your own to ensure it lasts for years.

Here we are sharing some tips for maintaining the condition of your pool:

Test your pool water

Water in an unbalanced pool can sting the eyes and skin, seem murky, and likely contain harmful microorganisms. Therefore, you should adjust the chemical levels until the water in your pool is safe to swim in and is clean and sanitary.

Although it may seem frightening and difficult, pool chemistry is relatively straightforward. Just a good water testing kit will do. Additionally, test the water in your pool before adding chemicals so that you can adjust them accordingly.

The three most important substances to pay attention to are pH levels, total alkalinity, and calcium hardness. One should spend a minimum of once or twice testing the pool’s water.

Picture by: mastertouchpools.com (Water testing kit)

Clean the Filter

The second thing you must remember while maintaining your pool is to clean the filter routinely. Although you won’t have to check the chemicals as frequently, cleaning the filter is still necessary to keep your pool looking beautiful and functioning correctly.

Related:
4 Tips for Buying a Dining Table

You should clean the filter out every 3-6 months, depending on the state of your pool and the weather. Checking the filter after a strong storm is also a good idea. A filter needs to be cleaned sooner due to heavy rain and bad weather.

Picture by: poolknights.com

Clean Various Baskets and Collection Pots

It would help if you inspected your pool’s other different baskets and collection pots in addition to the filter.

It would be beneficial if you first cleaned the pool pump’s hair and lint trap. The clear glass container with the lint and hair catch is within the pool pump. Usually, you should turn the pump off before reducing system pressure. People should only do cleaning every two weeks; however, if a more regular examination is necessary, conduct it.

If your pool has one, you should wipe out the skimmer basket and the trash collector or leaf basket.

Picture by: realestate.com.au

Maintain a Proper Balance of Chemicals

Once every week, you should test the water in your pool. A testing kit is available at the store, or you may hire someone to conduct it. In any case, keeping your pool’s water clear and free of debris is critical to maintaining a suitable balance of chemicals.

Picture by: homeguidecorner.com

Brush the walls and tile and vacuum the pool.

With a vacuum like this, you can unwind by the pool while a machine cleans.

To keep the water clear and lower the number of chemicals, you must vacuum once each week. The range of pool vacuums is enormous. If you have a manual design, sweep the pool’s surface back and forth like a vacuum. Each stroke should overlap the one before it. Every time you vacuum, check the filter and clean it if required. However, regular maintenance should include more than just vacuuming. Regularly brushing the tile and walls is an excellent idea to prevent calcium deposits and algae growth. What cleaning equipment you use depends on the material used to construct your pool’s walls. For concrete pools walled with plaster, use a firm brush; for walls made of vinyl or fiberglass, use a gentler brush. 

Related:
Growing a Fall Garden: Tips & Shortcuts

Use a soft brush to avoid damaging the grout or scratching the tiles. Practical tools include a pumice stone, putty knife, and a water-and-muriatic acid solution mixed 50/50.

Picture by: storables.com

Shock the pool regularly

As a pool owner, you’ve probably shocked your pool a few times.

It’s crucial to be precise about how frequently you shock your pool:

If you overdo it, you might get a “chlorine lock.” If you do it enough, your other pool chemicals will work better. What, then, is the magic number? How frequently should a pool be shocked?

Once each week, shock your pool. It maintains the stability of your sanitizer levels, which keeps your pool cleaner. To avoid unexpected algal takeovers, it’s also a good idea to shock the water after excessive use, pool parties, or storms.

Picture by: familyhandyman.com

Keeping that water clear

Having a crystal clear pool is simple as long as you balance your water, clean it out, and circulate it frequently. Maintaining your pool is essential for keeping the water clean and swimmable.

Picture by: cleanlivingpoolandspa.com

Final Thoughts

You can keep your swimming pool in excellent condition all year long and avoid any significant concerns by following the above pool maintenance recommendations. Maintaining a clean, well-kept pool is essential.

Following the advice given above, you can ensure that your pool remains in excellent condition and continues to provide you and your family with hours of fun.

Scroll to Top