A plumbing problem is nothing to laugh at or ignore, it can create serious issues for any homeowner or renter. Plumbing problems can happen out of the blue and without warning, but most commonly there are a number of warning signs. Before the problem becomes out of control or requires an expensive solution, keep an eye out for these signs. Knowing what to look for is important, so use these tips to help spot the most common warning signs of plumbing problems.
Drains or toilets backing up
Drains and toilets backing up are some of the most common warning signs of a plumbing problem. A blockage, whether it’s in your pipes or in the main can cause serious issues. If you notice your drains or toilet backing up, then it’s probably time to call an emergency plumber in Melbourne.
Blocked pipes or an issue with the main will place pressure on the release valve, meaning you can be inundated with water very quickly, both inside and outside your home. The blockage can also place pressure on the pipes, sometimes causing a burst which can be very costly to fix. Keep an eye on the drainage and if you notice any issues, make the call to a plumber today.
Moisture where it shouldn’t be
If you notice moisture in places where you think there shouldn’t be moisture, this can be a warning sign of a bigger problem. The bathroom is a key area of the house where this may happen, especially near the shower. The pipes in the wall which allow the shower to operate can sometimes leak, and this leaking creates moisture in the wall.
If you notice moisture around the shower or the walls, it’s best to get it inspected. A plumber can simply inspect the shower pipes to test where the leak may be coming from and provide potential solutions to ensure the damage is limited or stopped and doesn’t result in black mould.
The water keeps coming
Taps and sources of water can be very irritating when they won’t stop dripping or leaking. It may seem harmless given it’s only a small amount of water, but it can lead to a more serious problem if left untreated. The fix is relatively simple and should be conducted whenever a leak or drip is noticed.
The tap washers will need to be replaced, if you are a confident home handyperson you can do this yourself, but if the drip continues after the washer replacement then call your plumber. Plumbers have specialised tools for this job and will make sure your taps are set without any future leaks.
The temperature just isn’t right
If you notice that over time the temperature of your hot water just isn’t right or as hot as it used to be, this isn’t you getting used to the heat. It’s likely a problem or warning sign that your hot water system needs an inspection. There are a lot of moving parts and intricate systems in your hot water appliance, which makes it important to keep an eye on.
Whether the thermostat is on the brink of death or the supply of gas or electricity is playing up, you need to address the problem early. Addressing the issues early means you may be able to repair the existing system, instead of paying a lot of money for a new one. If your hot water temperature has changed, consider getting the hot water system inspected.
Plumbing problems can be painful and expensive to deal with, but often you will see the warning signs coming before the final issue happens. If you notice any of these warning signs, consider calling your plumber today to get things checked out and solve the problem early.
